Known Issues (Release 7.9)
You might encounter the following known issues after upgrading to release 7.9. This list is current as of the release date.
Where available, the workaround for an issue is also documented. HPE regularly releases maintenance releases and patches to fix issues. We recommend checking the release notes for any subsequent maintenance releases to see if one or more of these issues are fixed.
HPE Ezmeral Data Fabric Streams
- MS-1511
- When messages are produced for the second time on a stream, CopyStream fails with an
exception
com.mapr.db.exceptions.DBException: flush() failed with err code = 22
.
Client Libraries
- MFS-20211
- User unable to use standalone mapr-client on Ubuntu machines.
- MFS-18258
-
When you add a new cluster to a cluster group, the FUSE-based POSIX client and the loopbacknfs POSIX client take about five minutes to load or list the newly added cluster.
Workaround: None.
Data Fabric UI
Node Removal
- DFUI-2751
- Data Fabric UI hangs when there is removal of node operation is repeated by adding and removing the same node repeatedly.
Sign-in Issues
- DFUI-2743
- SSO (Keycloak SSO) user unable to log in to Data Fabric UI when the user is assigned a pre-defined role from Data Fabric UI.
- DFUI-2734
- A user that is assigned a user-defined role is unable to log in to Data Fabric UI. The 'no login permission' error is displayed when such a user attempts to log in to Data Fabric UI.
- DFUI-2701
-
Even after being assigned full control permission on all fabrics, the user is unable to log in to a non-primary fabric using Data Fabric UI
Workaround: None.
- DFUI-160
- If you sign in to the Data Fabric UI as an SSO user but you do not have fabric-level login permission, a sign-in page for the "Managed Control System" (MCS) is displayed. The "Managed Control System" sign-in is not usable for the consumption-based HPE Ezmeral Data Fabric.
- DFUI-437
- If you sign in to the Data Fabric UI as a non-SSO user and then sign out and try to sign in as an SSO user, a sign-in page for the "Managed Control System" (MCS) is displayed. The "Managed Control System" sign-in is not usable for the consumption-based HPE Ezmeral Data Fabric.
- DFUI-811
- If you launch the Data Fabric UI and then sign out and wait for 5-10 minutes and then attempt to sign in, a sign-in page for the "Managed Control System" (MCS) is displayed.
- DFUI-826
- In a cloud fabric, an empty page is displayed after a session expires and you
subsequently click on a fabric name. The browser can display the following
URL:
https://<hostname>:8443/oath/login
- DFUI-874
- Sometimes when you attempt to sign in to the Data Fabric UI, the "Managed Control System" (MCS) is displayed, or the Object Store UI is displayed.
- DFUI-897
- A user with no assigned role cannot sign in to the Data Fabric UI.
- DFUI-1123
- Attempting to sign in to the Data Fabric UI as a group
results in a login error message in the browser. For
example:
https://<hostname>:8443/login?error
Mirroring Issues
- MFS-17538
- During PBS validation, a primary cluster with automatic mirroring of a PBS volume to a
non-primary cluster might give the following
error:
Failed to fetch fabric cluster-151-B 401 Unauthorized: "HTTP ERROR 401 JWT validation failed: null<EOL>URI: /rest/dashboard/info/<EOL>STATUS: 401<EOL>MESSAGE: JWT validation failed: null<EOL>SERVLET: mapr-apiserver<EOL>"
- DFUI-1227
- If you create a mirror volume with a security policy, an error is generated when you try to remove the security policy.
- DFUI-1229
- Data aces on a mirror volume cannot be edited.
Display Issues
- DFUI-2691
- Existing user-defined roles are not visible on the Data Fabric UI when you wish to assign roles to users.
- DFUI-2708
- A user that is provided admin permissions by way of IAM policy assignment is unable to log in to the Data Fabric UI.
- DFUI-2719
- Permissions assigned a user by way of assigning IAM policy to user are not visible on the Data Fabric UI.
- DFUI-2703
- A user is unable to edit cluster settings and ACLs though the user has been granted permissions equivalent to fabric manager by way of assigning an with IAM policy with fabric management actions.
- DFUI-2749
- User-defined roles assigned to a user are not reflecting on the Data Fabric UI.
- DFUI-1186
- After you complete the SSO setup for a new fabric, fabric resources such as volumes and mirrors are not immediately displayed in the Data Fabric UI.
- DFUI-1221
- If a fabric includes a large number of resources, loading the resources to display in the Resources card on the home page can take a long time.
- DFUI-2102
- When you create a table replica on a primary cluster with the source table on a
secondary cluster, the replication operation times out. However, the table replica is
successfully created on the primary cluster. The table replica appears in the
Replication tab, but does not appear in the Data Fabric UI
Graph or Table view for the primary
cluster.
This behavior is the same for both a source table on the primary cluster and the replica on the secondary cluster.
External S3
- MFS-20148
- A Keycloak user is unable connect to an external S3 server with the access key and secret key, by using an S3 client.
- DFUI-2157
- Editing buckets on external S3 servers is not supported.
Installation or Fabric Creation
- MFS-18972
-
RHEL-based default keycloak that is shipped with Data Fabric cannot be used to configure STS.
Workaround: Set up external Keycloak to run on port 443 for STS to work.
- MFS-18734
- Release 7.7.0 of the HPE Ezmeral Data Fabric has a dependency
on the
libssl1.1
package, which is not included in Ubuntu 22.04. As a result, you must apply the package manually to Ubuntu 22.04 nodes before installing Data Fabric software. - IN-3482
- Fabric creation can fail if host-name resolution takes more than 300 ms.
- DFUI-565, EZINDFAAS-169
- Installation or fabric creation can fail if a proxy is used for internet traffic with the HPE Ezmeral Data Fabric.
Object Store
- DFUI-519
- An SSO user is unable to create buckets on the Data Fabric UI and the Object Store. This is applicable to an SSO user with any role such as infrastructure administrator, fabric manager or developer.
- DFUI-577
- Downloading a large file (1 GB or larger) can fail with the following
error:
Unable to download file "<filename>": Request failed with status code 500
Online Help
- DFUI-459
- If a proxy is used for internet traffic with the HPE Ezmeral Data Fabric, online help screens can time out or fail to fetch help content.
Security Policies
- DFUI-2736
- A fabric user is able to create a security policy from the command line but unable to create security policy from the Data Fabric UI.
- MFS-18154/EZINDFAAS-674
- A security policy created on a cloud-based primary fabric (such as AWS) is not replicated on to a secondary fabric created on another cloud provider (such as GCP).
Topics
- DFUI-637
- Non-LDAP SSO user authenticating to Keycloak cannot create topic on the Data Fabric UI.
- DFUI-639
- A non-LDAP SSO user authenticating to Keycloak cannot create a volume or stream using the Data Fabric UI.
Upgrade
- COMSECURE-615
- Upgrading directly from release 6.1.x to release 7.x.x can fail because the upgrade
process reads password information from the default Hadoop
ssl-server.xml
andssl-client.xml
files rather than the original.xml
files. Note that upgrades from release 6.2.0 to 7.x.x are not affected by this issue.
- EZINDFAAS-811
- Upgrading from release 7.6.1 to 7.7.0 fails if you initiate the upgrade from a Data Fabric UI URL that is not the URL provided by the seed node when you created the fabric. The seed node indicates the API server node that is the primary installer host.
- MFS-17624
- An upgrade from release 7.5.0 or earlier to 7.6.0 or later can terminate with a fatal error detected by the Java Runtime Environment.
- OTSDB-147
- After upgrading OpenTSDB from version 2.4.0 to version 2.4.1, the Crontab on each OpenTSDB node is not updated and continues to point to the previous OpenTSDB version.
- DFUI-2163
- SSO authentication is not enabled for Data Fabric UI, after upgrading from HPE Ezmeral Data Fabric release version 7.5 to release version 7.6.
Volumes
- DFUI-638
- Non-LDAP SSO user authenticating to Keycloak cannot create volume on the Data Fabric UI.
Workaround: Create a volume via the Data Fabric minIO client.
IAM Policies
- MFS-19102
- There is no option to attach multiple policies to a single user by using the
security
iam policy attach
maprcli command. - MFS-19817
-
The IAM policy state takes long (approx 30 minutes) to change from the Enforcing state to the Enforced state when you create and assign multiple IAM Policies (around 700+) to users.
- MFS-20152
- DFUI throws error 'role <role-name> does not exist' when you attempt assign IAM policy to a user-defined role.
- MFS-19111/MFS-19110
- When you assign an IAM policy to a user, the same user is getting added multiple times to the list of volume IAM ACEs, although the user already exists on the list.
- MFS-19771
- Numerous entries of the following error observed in the CLDB log: " ERROR Cluster [RPC-7]: updateCluster: cluster property size 2056 exceeded threshold 2016"