About Release 8.0.0
This site contains documentation for HPE Data Fabric release 8.0.0, including installation, configuration, administration, and reference content, as well as content for the associated ecosystem components and drivers.
8.0.0 Installation
This section contains information about installing HPE Data Fabric software. It also contains information about how to migrate data and applications from an Apache Hadoop cluster to a HPE Ezmeral Data Fabric cluster.
- Planning the Cluster
  Describes information and factors used in planning your cluster.
- Installation Methods
  Describes different ways to install the HPE Data Fabric.
  - Installing with a Seed Node
    Describes how to install the platform using a seed node and the Create Fabric interface.
  - Installing Manually
    Describes how to install HPE Data Fabric software and ecosystem components by using the command line.
    - Data Fabric Repositories and Packages
      Describes the repositories for Data Fabric software and the ecosystem components.
    - Package Dependencies
      Lists the interdependencies between packages across all the supported Operating Systems
    - Preparing Each Node
      Defines minimum requirements for each node in your cluster.
    - Installing without the Installer
      Describes how to install HPE Data Fabric software and ecosystem components manually.
      - Step 1: (Optional) Enable FIPS Mode
        If your cluster must be FIPS-compliant, you must enable FIPS mode at the operating system level before installing Data Fabric software. If FIPS compliance is not needed, you can skip this step.
      - Step 2: Import the Package Key
        Before you install Data Fabric packages, you must import the package key.
      - Step 3: Prepare Packages and Repositories
        To install services correctly, each node must have access to the package files.
      - Step 4: Install Cluster Service Packages
        The installation process varies based on the location of your packages and the configuration of your cluster.
      - Step 5: Verify Installation Success
        To confirm success, check each node.
      - Step 6: Set Environment Variables
        Before starting ZooKeeper or Warden, you must complete this step.
      - Step 7: Configure Nodes
        Connect nodes to the cluster, configure security, and arrange node storage.
      - Step 8: Bring up the Cluster
        Before you can install monitoring or ecosystem components, you must enable the cluster by starting ZooKeeper and Warden and verifying the cluster installation status.
      - Step 9: Install Metrics Monitoring
        Metrics monitoring is part of monitoring, which also includes log monitoring. Monitoring components are available as part of the Ecosystem Pack (EEP) that you selected for the cluster.
      - Step 10: Install Log Monitoring
        Installing the monitoring logging components is optional. The logging components enable the collection, storage, and visualization of core logs, system logs, and ecosystem component logs. Monitoring components are available as part of the Ecosystem Pack (EEP) that you selected for the cluster.
      - Step 11: Install Ecosystem Components Manually
        You can install one or more ecosystem components from any Ecosystem Pack (EEP) that is supported by the Data Fabric cluster version. An EEP consists of a group of ecosystem components that work together.
        Installing Airflow
        This topic includes instructions for using package managers to download and install Apache Airflow from the EEP repository.
        Installing AsyncHBase Libraries
        This topic includes instructions for using package managers to download and install AsyncHBase from the EEP repository.
        Installing Drill
        This topic provides instructions for using package managers to download and install Drill.
        Installing Flink
        This topic includes instructions for using package managers to download and install, or remove Flink from the DEP.
        Installing Hadoop and YARN
        This topic describes how to use package managers to download and install Hadoop and YARN services from the EEP repository.
        Installing HBase
        This topic includes instructions for using package managers to download and install HBase from the EEP repository.
        Installing HBase Client and Tools
        MapR 6.0.x does not support HBase as an ecosystem component. Beginning with EEP 6.3.0, MapR 6.1 reintroduced HBase as an ecosystem component. With EEP 6.3.0 and later you can install the HBase Client and tools even if you decide not to install HBase as an ecosystem component. This topic describes the HBase Client and other tools that are available for use with the HPE Data Fabric Database.
        Installing Hive
        This topic includes instructions for using package managers to download and install Hive from the EEP repository.
        Installing Hue
        This topic includes instructions for using package managers to download and install Hue from the EEP repository.
        Installing Kafka Schema Registry
        This topic includes instructions for using package managers to download and install the Kafka Schema Registry from a HPE repository.
        Installing KSQL
        This topic describes how to use package managers to download and install KSQL from the EEP repository.
        Installing Kafka Streams
        Kafka Streams is a Java library and is part of the mapr-kafka package. Kafka Streams does not require special installation steps; however, you must install the mapr-core and mapr-kafka packages to use Kafka Streams.
        Installing HPE Data Fabric Streams Clients
        This topic includes instructions for using package managers to download and install HPE Data Fabric Streams Clients from the EEP repository.
        Installing HPE Data Fabric Streams Tools
        This topic includes instructions for using package managers to download and install HPE Data Fabric Streams Tools from the EEP repository.
        Installing Data Access Gateway
        This topic includes instructions for using package managers to download and install the Data Access Gateway from the EEP repository.
        Installing Livy
        This topic includes instructions for using package managers to download and install Livy from the EEP repository.
        Installing NiFi
        This topic includes instructions for using package managers to download and install Apache NiFi from the EEP repository.
        Installing OTel
        This topic includes instructions for using package managers to download and install OTel from the EEP repository.
        Installing Polaris
        This topic includes instructions for using package managers to download and install Polaris from the Data Fabric Ecosystem Pack (DEP) repository.
        Installing Ranger
        This topic includes instructions for using package managers to download and install Ranger from the EEP repository.
        Installing Spark Standalone
        This topic describes how to use package managers to download and install Spark Standalone from the EEP repository.
        Installing Spark on YARN
        Describes how to use package managers to download and install Spark on YARN from the EEP repository.
        Installing Spark on Mesos
        This section includes instructions to download and install Apache Spark on Apache Mesos.
        Installing Zeppelin
        This topic includes instructions for using package managers to download and install Zeppelin 0.9 and later from the EEP repository.
      - Step 12: Run configure.sh
        Run configure.sh with the -R option to complete the configuration of ecosystem components that were added manually.
    - Configuring the Cluster
      Describes post-installation configuration tasks for HPE Data Fabric clusters.
  - Installing with the Installer
    Describes how to install HPE Data Fabric software and ecosystem components by using the legacy graphical user interface.
  - Installing with Stanzas
    Describes how you can install the HPE Data Fabric by using a Stanza.
  - Installing with an Ansible Script
    Describes how you can install the HPE Data Fabric by using an Ansible script.
- Installing the HPE Data Fabric File Store
  Describes how to install File Store software with or without the Installer.
- Installing the HPE Data Fabric Object Store
  Describes installation of the HPE Data Fabric Object Store software with or without the Installer.
- Installing Kubernetes Interfaces for Data Fabric
  This section describes how to plan for and install the Container Storage Interface (CSI) Storage Plugin and the Kubernetes Interfaces for Data Fabric FlexVolume Driver.
- Setting Up Clients and Services
  Describes how to set up and use interfaces to an HPE Data Fabric cluster from a client computer.
- Setting Up the Control System
  Describes how to configure and access the Control System.
- Migrating to the HPE Data Fabric
  Provides instructions for migrating business-critical data and applications from an Apache Hadoop cluster to an HPE Data Fabric cluster.
- Applying a Patch
  You can apply a patch by using the Installer, by using the command line (a manual process), or by using an Installer Stanza.
8.0.0 Upgrade
This section describes how to upgrade HPE Data Fabric software.
8.0.0 Data Fabric
HPE Data Fabric is the industry-leading data platform for AI and analytics that solves enterprise business needs.
8.0.0 Administration
This section describes how to manage the nodes and services that make up a cluster.
8.0.0 Development
This section contains information related to application development for Ezmeral ecosystem components and HPE Data Fabric products, including the file system, Database (Key-Value and JSON), and Event Streams.
Other Docs
This section contains release-independent information, including: Installer documentation, Ecosystem release notes, interoperability matrices, security vulnerabilities, and links to other Data Fabric version documentation.
Glossary
Definitions for commonly used terms in MapR Converged Data Platform environments.

Installing OTel

This topic includes instructions for using package managers to download and install OTel from the EEP repository.

About this task

For instructions to set up the EEP repository, see Step 11: Install Ecosystem Components Manually.

Run the following commands as root or using sudo:

Procedure

Install the mapr-ezotelcol package:

RedHat/CentOS

# yum install mapr-ezotelcol

SLES

# zypper install mapr-ezotelcol

Ubuntu

# apt-get install mapr-ezotelcol

Run the configure.sh script with the following command to configure the OTel role for the node:
```
/opt/mapr/server/configure.sh -R
```

Partners Support Dev-Hub Community ALA Privacy Policy Glossary

HPE Data Fabric 8.0.0 Software Documentation
Abstract	This site contains documentation for HPE Data Fabric Software version 8.0.0 including installation, configuration, administration, and reference content, as well as content for the associated bundled ecosystem components and drivers.
Published	November 2025
Edition	8.0.0
Topic last updated	2023-11-14