trace setmode
Sets the trace mode.
There are two modes:
- Default
- Continuous
In default mode, all trace messages are saved in a memory buffer. If there is an error, the buffer is dumped to stdout. In continuous mode, every allowed trace message is dumped to stdout in real time.
Syntax
- CLI
-
maprcli trace setmode [ -host <host> ] -mode default|continuous [ -port <port> ]
- REST
-
None.
Parameters
Parameter |
Description |
---|---|
host |
The IP address of the host on which to set the trace mode |
mode |
The trace mode. |
port |
The port to use. |
Examples
Set the trace mode to continuous:
- CLI
-
maprcli trace setmode -mode continuous