tier rule create

Creates a rule for offloading data to a tier.

Syntax

CLI
$ maprcli tier rule create
    -name <rule_name>
    -expr <regular_expression>
   [ -cluster <cluster_name> ]
REST
Request Type POST
Request URL
http[s]://<host:port>/rest/tier/rule/create?<parameters>

Parameters

Parameter Description
cluster The name of the cluster on which to run the command.
expr The criteria for offloading data. The criteria can be defined using a combination of the following:
u Username or user ID, as configured in the OS registry (such as /etc/passwd file, LDAP, etc.), of a specific user.

Usage: u:<username or user ID>

g Group name or group ID, as configured in the OS registry (such as /etc/group file, LDAP, etc.), of a specific group.

Usage: g:<groupname or group ID>

a (atime) Time (in seconds or days) since the files were last accessed. The number of seconds can be specified by appending s to value and the number of days can be specified by appending d to the value.

Usage:

  • "a:<value>s" — specifies atime in seconds
  • "a:<value>d" — specifies atime in days
NOTE
If the system time on CLDB and file server nodes are different, the atime rule for offloading data may not work as intended.

This tier rule is matched and files are offloaded, when all of the following conditions are met:

  1. atime tracking is enabled at volume level
  2. Time since atime that is configured on the volume is more than the time specified in the rule
  3. Duration since the file was last accessed is more than the time specified in the rule

Assume that the atime feature is enabled on the volume and that the time in the rule is set to a:300s. Based on this rule, all files that are not accessed since 300s, are offloaded. However, this rule is valid only if time since atime tracking is enabled, is more than 300s. The volume level parameter atimeTrackingStartTime denotes the start time of atime.

For more information, see Tuning Last Access Time.
m (mtime) Time (in seconds or days) since the files were last modified. The number of seconds can be specified by appending s to value and the number of days can be specified by appending d to the value.

Usage:

  • "m:<value>s" — specifies mtime in seconds
  • "m:<value>d" — specifies mtime in days
All files that are not modified since the specified amount of time, are offloaded.
NOTE
If the system time on CLDB and file server nodes are different, the mtime rule for offloading data may not work as intended.
s The size of the file in bytes, kilobytes, megabytes, or gigabytes. The size of the file can be specified by appending one of the following to the value: b for bytes, k for kilobytes, m for megabytes, or g for gigabytes.

Usage

  • "s:<value>b" — specifies file size in bytes
  • "s:<value>k" — specifies file size in KB
  • "s:<value>m" — specifies file size in MB
  • "s:<value>g" — specifies file size in GB
All files whose size exceeds the specified size are offloaded.
Or, use the following:
p (Default) Specifies all files. Specifies that this operation is applicable to all the files without restriction. This cannot be combined with any other operator.
"" Indicates none of the files. Specifies that this operation cannot be performed on any of the files.
Use the following to string multiple criteria for offload:
& AND operation to combine multiple expressions as the criteria for the rule.
| OR operation to indicate either of the expressions as the criteria for the rule.
() Delimiters for subexpressions.
name The name of the rule.

Examples

Create a rule to offload files older than a year:

/opt/mapr/bin/maprcli tier rule create -name rule1 -expr "m:365d" -json
{
	"timestamp":1519681290079,
	"timeofday":"2018-02-26 01:41:30.079 GMT-0800 PM",
	"status":"OK",
	"total":0,
	"data":[
		
	],
	"messages":[
		"Successfully created rule: 'rule1'"
	]
}
# curl -k -X POST 'https://abc.sj.us:8443/rest/tier/rule/create?name=rule1&expr=m:365d' --user mapr:mapr
{"timestamp":1519681475025,"timeofday":"2018-02-26 01:44:35.025 GMT-0800 PM","status":"OK","total":0,"data":[],"messages":["Successfully created rule: 'rule1'"]}

Create a rule to offload files larger than 5 GB:

# /opt/mapr/bin/maprcli tier rule create -name rule2 -expr "s:5g" -json
{
	"timestamp":1519681586774,
	"timeofday":"2018-02-26 01:46:26.774 GMT-0800 PM",
	"status":"OK",
	"total":0,
	"data":[
		
	],
	"messages":[
		"Successfully created rule: 'rule2'"
	]
}
# curl -k -X POST 'https://abc.sj.us:8443/rest/tier/rule/create?name=rule2&expr=s:5g' --user mapr:mapr
{"timestamp":1519681667766,"timeofday":"2018-02-26 01:47:47.766 GMT-0800 PM","status":"OK","total":0,"data":[],"messages":["Successfully created rule: 'rule2'"]}

Create rule to offload files whose owner is m7user1:

# /opt/mapr/bin/maprcli tier rule create -name rule3 -expr "u:m7user1" -json
{
    "timestamp":1519682014521,
    "timeofday":"2018-02-26 01:53:34.521 GMT-0800 PM",
    "status":"OK",
    "total":0,
    "data":[
        
    ],
    "messages":[
        "Successfully created rule: 'rule3'"
    ]
}
# curl -k -X POST 'https://abc.sj.us:8443/rest/tier/rule/create?name=rule3&expr=u:m7user1' --user mapr:mapr
{"timestamp":1519682095080,"timeofday":"2018-02-26 01:54:55.080 GMT-0800 PM","status":"OK","total":0,"data":[],"messages":["Successfully created rule: 'rule3'"]}

Create rule to offload all files:

# /opt/mapr/bin/maprcli tier rule create -name rule4 -expr "p" -json
{
	"timestamp":1519682694183,
	"timeofday":"2018-02-26 02:04:54.183 GMT-0800 PM",
	"status":"OK",
	"total":0,
	"data":[
		
	],
	"messages":[
		"Successfully created rule: 'rule4'"
	]
}
# curl -k -X POST 'https://abc.sj.us:8443/rest/tier/rule/create?name=rule4&expr=p' --user mapr:mapr
{"timestamp":1519682828031,"timeofday":"2018-02-26 02:07:08.031 GMT-0800 PM","status":"OK","total":0,"data":[],"messages":["Successfully created rule: 'rule4'"]}

Create rule to not offload any files:

# /opt/mapr/bin/maprcli tier rule create -name rule5 -expr "" -json
{
	"timestamp":1519682947271,
	"timeofday":"2018-02-26 02:09:07.271 GMT-0800 PM",
	"status":"OK",
	"total":0,
	"data":[
		
	],
	"messages":[
		"Successfully created rule: 'rule5'"
	]
}

Create a rule, called testRule, for offloading all files owned by user m7user1 or for offloading files owned by user mapr and whose size is greater than 5 GB or whose file modification timestamp is greater than 365 (days):

# /opt/mapr/bin/maprcli tier rule create -name testRule -expr "u:m7user1 | (u:mapr & (s:5g | m:365d))" -json
{
	"timestamp":1519683138305,
	"timeofday":"2018-02-26 02:12:18.305 GMT-0800 PM",
	"status":"OK",
	"total":0,
	"data":[
		
	],
	"messages":[
		"Successfully created rule: 'testRule'"
	]
}
# curl -k -X POST 'https://10.10.82.24:8443/rest/tier/rule/create?name=testRule&expr=u%3Am7user1%7C%28u%3Amapr%26%28s%3A5g%20%7C%20m%3A365d%29%29' --user mapr:mapr
{"timestamp":1526488621687,"timeofday":"2018-05-16 09:37:01.687 GMT-0700 AM","status":"OK","total":0,"data":[],"messages":["Successfully created rule: 'testRule'"]}